Hair corrugation or corrugation

Hair corrugation, commonly referred to as crimping, is a styling method that gives your hair more volume and texture. The 80s and 90s saw the popularity of this trend, which has returned with a vengeance in recent years. It’s adored for how easy it is to create eye-catching, fun looks.

Hair corrugation is a flexible option that can be used to enhance your hairstyle for a special occasion or simply add some fun to your regular appearance. It gives you a distinctive way to change up your look and works on a variety of hair types and lengths.

This post will explain hair corrugation, what you need to know about the tools, and how to maintain healthy hair while getting that famously crimped texture.

Feature	Description
What is hair corrugation?	A technique that uses a special iron to create small, textured waves in the hair, giving it a crimped look.
Benefits	Adds volume and texture to thin hair, creates a unique style that stands out.
How long it lasts	The effect can last for several days or until the next wash, depending on hair type and care.
Suitable hair types	Works best on straight or slightly wavy hair but can be done on most types with the right tools.
Styling tools	A corrugation iron is used, which has ridges to press the hair into waves.
Heat protection	Always use a heat protectant spray to minimize damage during styling.
Occasions	Great for special events, parties, or when you want a bold look.

Hair corrugation, sometimes referred to as crimping, is a common styling method that gives hair tiny, zigzag-like waves that give it texture and volume. This style gives the hair a bold and playful appearance and is suitable for both special occasions and everyday wear. Hair corrugation can provide a new, dynamic look with little work, whether you’re trying to give thin hair more body or trying out a different style.

What is corrugation

These are uniquely shaped curls with a corrugated surface. They were huge in the 1990s and are currently taking over the modern beauty market once more. They contribute to the creation of long-lasting (up to several days) voluminous hair. Individual strands and all of the curls are curled.

There are two methods for corrugating hair: braiding and using an iron. You can make a variety of hairstyles with the corrugation effect, such as ponytails, loose curls, braids, and buns.

Benefits

• hair after corrugation does not become electrified and requires a minimum of styling products for fixation;
• the curl lasts for a long time (until the next hair wash);
• you can do corrugation on hair of any length;
• ease of use and the ability to create various hairstyles;
• lasting volume.

Drawbacks:

• if the corrugation is done without a curling iron (by braiding), the ends and roots remain uncurled, and the strands themselves may not be the same;
• it takes a lot of time to curl all your hair.

Take note! Using a straightening iron on a regular basis can harm your hair. Use a heat tool no more than once a week and protect your hair from heat damage before curling to reduce the damaging effects of high temperatures.

Types

The following corrugation types vary based on the type of attachment:

• fine. Allows you to create maximum volume. Often used to lift the roots, as an alternative to backcombing or together with it. It is better not to do fine corrugation on short haircuts all over the head, as the hairstyle will turn out voluminous, which is not always appropriate. But individual strands look good;
• medium. Suitable for any length. Often used together with a small or large attachment to place accents in the hairstyle;
• large. Best suited for medium-length hair. On short strands, the strands may stick out, and on long ones, large corrugation quickly unwinds under their own weight. In this case, additional fixation means are required.

How to do

It’s easy to create a corrugation at home. You must learn the fundamentals of using a styler and be familiar with the various curling techniques in order to accomplish this. Remember that you won’t be able to create a corrugation quickly either. This will take approximately two hours, depending on the length and thickness of your hair.

Important rules

• Corrugated curls are created on clean hair;
• if your hair is stiff and difficult to style, you need to apply mousse or foam to it before curling. For the effect of wet strands or well-defined curls, use gel;
• braids should be woven on slightly damp curls;
• the thinner the strand you take for curling, the more voluminous your hairstyle will be;
• using a thermal device on uncurled hair is harmful. Curls become brittle, fragile, burnt;
• when choosing a styler, it is better to give preference to models with a ceramic surface, temperature regulator and a long cord;
• Curly hair must be straightened with a straightener before crimping;
• when using a straightening iron, apply heat protection to your hair;

Crucial! Keep an eye on the iron’s temperature: 180 degrees is sufficient for weak, thin hair, and 200 to 210 degrees is preferable for hard strands.

Styling with an iron

On all hair

1. Apply heat protection to dry, clean curls.
2. For hair that is difficult to style, use styling products: mousse, foam or gel.
3. Pick up a strand at the roots, place it between two plates of the styler, and press for 5-10 seconds. Place the iron perpendicular to the taken bunch.
4. Lower the iron below the curled section and repeat the procedure on the same strand. Make sure that the waves are parallel.
5. Do all the steps with the rest of the hair.

Creating a pattern

How should you use a corrugated curling iron to pattern your hair? The idea is the same: a styler is only used on specific sections of the hair’s upper portion.

To get the checkerboard effect, do the following:

1. Take a wide nozzle and press it on the curl at the roots.
2. Step back from the curled section down at a distance equal to the corrugated area.
3. Press the strand with the iron again and step back again. So along the entire length of the strand being processed.
4. Next, you need to pick up a bunch of the same width as the previous one and press it with the iron in the place where there was a flat surface in the previous strand.
5. Step back the same area as the corrugated one and press the curl with the iron again.
6. Apply two strands together and look at the picture. If everything is done correctly, the corrugated hair will be the same size, and the curled sections will be located opposite the uncurled ones, forming a checkerboard pattern.

How to use an iron to create striped corrugations

Throughout the length of the curls, press the styler through the same sections. Verify that the strand in work corresponds with the previous one as shown in the drawing.

Suggestions. You can create the illusion of a wave by positioning the thermal device at a 45-degree angle. You can then manipulate the wave’s bends by raising and lowering the iron on each strand as it goes.

You will obtain a lovely styling if you corrugate loose curls and wear a ready-made "malvina" hairstyle. Additionally, in this instance, a horizontally braided braid will highlight the lovely corrugated curls.

A hairdo where the curls are limited to individual strands looks intriguing. They might be found in various locations.

Root volume

Compared to backcombing, this styling has the advantage of having volume at the roots that lasts longer and looks more natural. Sometimes corrugation at the roots and backcombing are combined to create extremely voluminous hairstyles.

How to corrugate a volume correctly:

1. Apply a styling product to clean, dry hair (if it lends itself well to styling, you can do without styling).
2. Separate the topmost strands at the parting location. Pin them with clips. Later, you will cover the corrugated areas with them so that they are not noticeable.
3. Pick up the next strand (the one that is separated from below) and press it with an iron at the very roots. The length of the corrugated curl from the roots should be up to 5 cm. The longer and thicker the hair, the longer the curled area.
4. Thus, treat the other upper strands with a thermal device. If you need more volume, go over the side zones as well.

See our extensive review to learn how to select a corrugated curling iron:

Weaving braids

Without an iron, corrugations can be made. Just plait thin strands of hair that are slightly damp to achieve this. You can braid individual hair strands or the entire head of hair. Tight braids are a neat way to finish off a hairstyle. Take identical-sized bundles and secure the ends with elastic bands. The styling will be more voluminous the thinner the braided braids.

Since the hair is not exposed to extreme temperatures, this method is gentle. However, bear in mind that doing such a corrugation by hand will take a lot of time—between one and two hours—and that people with short hair should avoid using this method.

Features of styling

Long hair can be corrugated using any kind of attachment—small, medium, or large. Any two of the three choices are frequently combined.

Long curls with corrugated strands look the best because you can create different styles with them.

• loose hair;
• a ponytail with corrugated ends;
• a bun;
• evening hairstyles;
• strands gathered on the sides;
• voluminous braid (braided on completely corrugated curls) and others.

You can also play around with hairstyles if you have medium-length hair and corrugation. Similar to long curls, there are numerous ways to style it.

Short hair can be corrugated just as successfully. It is preferable to use a medium attachment in this situation or to switch it out with another kind. Only small or large corrugation should not be used to curl your entire head of hair. The head will resemble a dandelion in the first instance, and the strands may protrude in an unappealing way in the second.

In the final styling, a few iron-curled bangs, patterns, or corrugated strands will look nice. You can lift the hair on one or both sides of a bob that has been curled and secure it with a hair clip.

These hairstyles stay in place for a long time—that is, until your next hair wash. Light waves will persist in long hair even after the initial curls unwind due to gravity.

If you choose to perform the corrugation yourself but are unsure of how to select the best curling technique, try a few different approaches. Experiment with the number of curled strands and zones on the hair, images, and the width of the attachments. After that, you’ll be able to style successfully for any occasion by using your own creative approach.

The following article offers a variety of corrugated hairstyle options:

Hair corrugation gives your hair volume and texture, making it a stylish and enjoyable way to change up your appearance. It’s a flexible choice that suits a range of hair types and lengths, whether your goal is to make a big statement or a subtle lift.

You can effortlessly produce this effect at home with the appropriate equipment and a little practice. Just keep in mind that in order to keep your hair healthy and shiny, use heat protection products.

Hair corrugation is definitely something you should try if you’re looking for a distinctive look that stands out. It’s an easy yet effective way to change up your hairstyle quickly.

Video on the topic

Large corrugation for volume

5 types of corrugation curling irons for hair, how to quickly and make volume for a long time

Hair laying "Hofre".

HAIRSTYLES FOR CORRUGATED HAIR

Professional crimping tongs MaxStyle

Hair styling with a curling iron – corrugation.

corrugation for root volume. How to choose? babyliss, Sway and Vilins. What is better?!!

UKI GROUPIE FRISE corrugation iron